Manitowoc Ice Ice Maker K00348 User Manual

K00348 DISPENSER BAFFLE KIT

Installation Instructions

The K00348, dispenser baffle kit, must be used with the S-0322 and S-0422 ice machines, when the ice machine is

used on any ice/beverage dispenser.

1. Remove both front panels.

2. Examine the ice machine to see if the machine has four screws on the lower front plastic panels (see drawing).

3. If there are screws, remove them from the countersunk holes on the front surface of the machine. Save the

screws.

4. Install the deflector, using the four screws that were removed in step 3.

5. Four screws and two backing plates are in the kit.

6. If there are no screws on the ice machine (step 2), pierce the thin plastic countersunk holes, install the backing

plates, and install the deflector, using the screws from the kit.

7. Replace the front panels.

Backing Plate

to be Inserted

into Side

Pocket of

Bulkhead

Screws

Backing Plate to be

Inserted into Side

Pocket of Bulkhead

New Ice Baffle

Screws

Manitowoc Ice, Inc.

2110 South 26^thStreet, P.O. Box 1720, Manitowoc, WI 54221-1720 USA